SV-668 Aquarium Silicone Sealant
Product Description
FEATURES
1.Fast curing,good adhesion
2.Excellent high and low temperature resistance
3.Clear color, customized color
COLOURS
SIWAY® 668 is available in black, gray, white and other customized colours.
PACKAGING
300ml plastic cartridges
BASIC USES
1.The installation of large aquarium adhesive sealing
2.Repair aquarium
3.Glass assembly
TYPICAL PROPERTIES
These values are not intended for use in preparing specifications
| Item | Standard |
Result |
|
| Sag degree | Upright(mm) | ≤3 | 0 |
| parallel | Nodeformation | Nodeformation | |
| Skin dry time(h) | ≤3 | 0.13 | |
| Extrude，ml/min | ≥80 | 239 | |
| Tensile Strength(M pa) at 23℃ | >0.4 | 0.58 | |
| Adhesion properties | No destroy |
No destroy |
|
CURE TIME
As exposed to air, SIWAY 668 begins to cure inward from surface. Its tack free time is about 50 minutes; the full and optimal adhesion depends on the sealant depth.
SPECIFICATIONS
SV-668 is designed to meet or even exceed the requirements of:
Chinese national specification GB/T 14683-2003 20HM
STORAGE AND SHELF LIFE
SV-668 should be stored at or below 27℃ in original unopened containers. It has a shelf life of 12 months from the date of manufacture.
HOW TO USE
Surface Preparation
Clean all joints removing all foreign matter and contaminants such as oil, grease, dust, water, frost, old sealants, surface dirt, or glazing compounds and protective coatings.
Application Method
Mask areas adjacent to joints to ensure neat sealant lines. Apply BM668 in a continuous operation using dispensing guns. Before a skin forms, tool the sealant with light pressure to spread the sealant against the joint surfaces. Remove masking tape as soon as the bead is tooled.
TECHNICAL SERVICES
Complete technical information and literature, adhesion testing, and compatibility testing are available from SIWAY.
