Products
-
SV8890Two-component Silicone Structural Glazing Sealant
Two-component polyurethane insulating glass sealant is a neutral cure, mainly used for the insulating glass of the second seal. Product formulation to use its performance with high modulus, high strength, to meet the requirements of insulating glass assembly.
-
SV888 Weatherproof Silicone sealant for curtain wall
SV-888 silicone weatherproof sealant is a one part, elastomeric and neutral cure silicone sealant, designed for glass curtain wall, aluminum curtain wall and building exterior design, has excellent weathering properties, it can form durable and most building materials, waterproof and flexible interface.
-
SV628 Acetic Silicone sealant for Window and Door
It is one- component, moisture curing acetic silicone sealant. It cures fast to form a permanently flexible, waterproof and weather resistant silicone rubber.
-
SV119 fireproof silicone sealant
Product Name SV119 fireproof silicone sealant Chemical Category Elastomer Sealant Hazards Category Not applicable Manufacturer/Supplier Shanghai Siway Curtain Material Co., Ltd. Address No. 1, Puhui Road, Songjiang Dist, Shanghai, China -
SV 999 Structural Glazing Silicone Sealant
SV – 999 silicone structural sealant is a one-component, neutral curing, designed for glass curtain wall, aluminum curtain wall, glass daylighting roof and metal structural engineering structural assembly silicone sealant. Show the effective physical properties and bonding performance
-
SIWAY A1 PU FOAM
SIWAY A1 PU FOAM is a one-component, economical type and good performance Polyurethane foam. It is fitted with a plastic adapter head for use with a foam application gun or a straw. The foam will expand and cure by moisture in the air. It is used for a wide range of building applications. It is very good for filling and sealing with excellent mounting capacities, high thermal and acoustical insulation. It is environmental friendly as it does not contains any CFC materials.
-
SV High performance mildew silicone sealant
Siway high-performance mildew silicone sealant is a one-component, neutral curing, designed for decoration in the need to provide good anti-mildew performance of the occasion designed by environmental protection products. This product can be easily extruded under wide temperature conditions, relying on moisture in the air to cure into excellent, durable elastic silicone rubber, and most of the building materials in the case without primer can produce superior Of the bondability.
-
Silicone Sealant for solar photovoltaic assembled parts
The assemblage of PV modules frame and laminated pieces must be connected closely and reliably with good sealing function against liquids and gases corrosion.
The Junction box and the back plates should have good adhesion and would not fall off even under stress partly in long time.
709 is designed for the bonding of the solar PV module aluminum frame and the junction box. This product, neutral cured, has excellent adhesion, excellent aging resistance, and could prevent the penetration of gases and liquids effectively.
-
SV-800 General purpose MS sealant
General purpose and low modulus MSALL sealant is a high quality, single component, paintable, anti-polluting neutral modified sealant based on silane-modified polyether polymers. The product does not contain solvents, no pollution to the environment, while most of the building materials, without primer, can produce superior adhesion.
-
SV628 Acetic Silicone sealant for Window and Door
SV628 is a one-part, acetoxy cure silicone sealant for general purpose applications. It provides a flexible bond and will not harden or crack. It is a high performance sealant, with +-25% movement capability when properly applied. It offers long term durability in a range of general sealing or glazing applications on glass, aluminum, painted surfaces, ceramics, fiberglass, and non-oily wood.
-
SV-312 Polyurethane Sealant for Windshield Glazing
SV312 PU Sealant is one- component polyurethane product formulated by Siway Building Material Co.,LTD. It reacts with moisture in the air to form a kind of elastomer with high strength, aging, vibration, low and corrosive resistance properties. PU Sealant was widely used to join the front, back and side glass of the cars and also can keep a steady balance between the glass and the paint on the bottom. Normally we need to use a sealant guns to press out when it shaped in a line or in bead.
-
Fireproof Polyurethane Foam
SIWAY FR PU FOAM is multi purpose, filling and insulation foam which carries DIN4102 standards. it carries fire retardancy(B2). It is fitted with a plastic adapter head for use with a foam application gun or a straw. The foam will expand and cure by moisture in the air. It is used for a wide range of building applications. It is very good for filling and sealing with excellent mounting capacities, high thermal and acoustical insulation. It is environmental friendly as it does not contains any CFC materials.
