SV G1-EPS INSULATION BOARD ADHESIVE FOAM

Short Description:

G1-EPS is made of polyurethane environmental protection material, with high bonding strength, large spraying coverage, safety and health, non-toxic and non-irritating smell, fast drying, good spraying performance and other characteristics. Compared with traditional all-purpose adhesive, G1-EPS overcomes product defects such as toxic, odorous, long drying time and damage to human health. This product is widely applicable, convenient and fast. It can be used only by shaking and gently pressing the self-spraying button to solve the problems of scraping, brushing and rolling coating before the change and relying on the air compressor to squeeze out the glue. It can play a significant role in outdoor, aerial work, and the convexity and dead corner bonding of special materials.

Package: Aerosol, 750 mL

Surface dry time: 5mins

Send email to us

Product Detail

Product Tags

Product Description

MOQ:1000 Pieces

PACKAGING

Aerosol, 750 mL

Keep straight

COLOURS

Available in black, gray, white and other customized colours.

G1-EPS is made of polyurethane environmental protection material, with high bonding strength, large spraying coverage, safety and health, non-toxic and non-irritating smell, fast drying, good spraying performance and other characteristics. Compared with traditional all-purpose adhesive, G1-EPS overcomes product defects such as toxic, odorous, long drying time and damage to human health. This product is widely applicable, convenient and fast. It can be used only by shaking and gently pressing the self-spraying button to solve the problems of scraping, brushing and rolling coating before the change and relying on the air compressor to squeeze out the glue. It can play a significant role in outdoor, aerial work, and the convexity and dead corner bonding of special materials.

FEATURES

1.Normal applicable temperature of tank : + 5 ℃~ + 35 ℃

2.Optimum operating temperature : + 18 ℃ ~ + 25 ℃

3.Temperature resistance range after curing : -30 ℃ ~ + 80 ℃

4.Safety: no formaldehyde, no toluene, no xylene, no irritating smell

5.Stability: weak acid resistance, weak alkali resistance, corrosion resistance

6.Water resistance: strong adhesion after immersion

7.Good adhesion to most substrates and metal parts

Typical Properties

Typical property values of SIWAY® G1-EPS as supplied and cured are set forth in the tables below. Typical data below should not be used as specifications development. Assistance with specifications is available by contacting SIWAY at 0086-18016469848.

TEST ITEM	UNIT	TYPICAL VALUE	TEST METHOD OR STANDARD
Surface dry time	min	5	FEICA TM1014：2013
Tensile bond strength	MPa	0.11	JC 936-2004
Shear strength	MPa	0.12	JC 936-2004

Applications

1. Especially suitable for the installation of external wall insulation board

2. Can bond most of the building decoration materials such as various metals, rubber, plastics, leather, wood, ceramics, etc

3. Can bond all kinds of textiles, such as cloth, sofa sponge, foam, mattress, etc

Product Information

Instructions

1..Shake can vigorously for 60 times before using it.

2.Clean and pre-moisten surface before using it.

3.Turn the can upside down and fix it on the gun connection, turn counterclockwise to open the nozzle flow valve and adjust the flow.

4.Vertically fill gaps from the bottom, fill the foam about three quarters of the space.

5.Foam starts curing in 10 minutes. Wait for one hour before doing next step.

6.Use a knife to flatten the foamed outer layer, and use a material such as cement or paint to finish the surface.

Shelf-life and storage

12 months in dry and cool place at 18 ℃ ~ 22 ℃

Health and Safety Advice

The product should avoid direct sunlight, and the storage temperature should not exceed 50 ℃

Keep the cans out of reach of children

Do not approach open flames or contact with flammable and explosive materials; Do not pierce or burn even after use

Severe bumps and collisions are strictly prohibited during transportation, and it is forbidden to put in the cab.

Ventilation conditions when using, and no smoking

Reference product label

Notice

The construction surface should grease-free, oil-free and dust-free, and the construction surface should be fully moistened ( spray a little water ) SIWAY PU foam gun is recommended to improve construction quality When spraying from bottom to top, pay attention to the expansion of foam.If you need to replace a new can, shake the new can for one minute, then unscrew the empty one, and clean the connection port of the spray gun with a special foam cleaner. Replace the new can as soon as possible to prevent the connection port of the spray gun from solidifying

After using it, please clean the spray gun thoroughly with cleaner immediately

When spraying in layers, spray water mist before spraying each layer

The cured PU foam is not resistant to UV-rays. Therefore, other coatings ( such as cement mortar ) or sealant should be used to protect the foam surface

Limited Guarantee

The indicators and data given in this information are based on our existing technical knowledge and practical experience, and just for reference only. The good application of the product not only depends on the quality of the product, but also on many factors beyond our capabilities. Therefore, SIWAY cannot guarantee that this product is suitable for various usage conditions, and any written complaints about product quality must be issued within six months of the product being shipped. Complaints that are not written or later than the time limit for complaints will not be accepted. Before using this product, the user should determine the applicability of this product and fully consider all possible risks and responsibilities. The further application and processing of our products are beyond our control. Therefore, our responsibility for the products provided is limited to the parts delivered by us and used by you. It is not responsible for the indirect losses caused by the use of our products. The technical support and customer service center of our marketing department are willing to provide you with product consultation and application technical services. Welcome to contact us.