SV862 Premium Grade Self Leveling Hybrid Sealant
1. 1-component, no mixing required
2. Self-leveling consistency, easily fills the cracks on the floor
3. Waterproof; immediately seals water
4. Possesses permanent elasticity
5. High adhesion strength
6. Capable of ±20% joint movement
7. Paintable
Core Advantages
-
1.Self-Leveling Property: Requires no tooling or manual smoothing. The sealant automatically fills gaps and levels itself, ensuring a clean, uniform, and professional aesthetic finish.
-
2.Multi-Substrate Compatibility: Demonstrates exceptional adhesion to a wide range of materials, including concrete, asphalt, masonry, brick, and metals (e.g., aluminum and steel).
-
3.Superior Paintability: Unlike pure silicone, hybrid sealants are paintable once fully cured, allowing for seamless color integration with the surrounding environment.
-
4.Weather Resistance & Eco-Friendly: Offers excellent UV stability. Most formulations are Low VOC, solvent-free, and isocyanate-free, making them environmentally responsible and safe for various projects.
-
5.Moisture-Tolerant Application: Advanced hybrid technologies (such as MS Polymers) allow for direct application on damp or moist surfaces without the bubbling or off-gassing issues common in traditional polyurethanes.
APPLICATION AREAS
- * Used for sealing of horizontal joints.
- * Waterproofing applications.
- * Interior and exterior areas.
- * Expansion joints between many different construction materials.
- * Control joints.
- * Driveways/Garages.
- * Sidewalks.
- * Pool decks.
INSTRUCTIONS
* Before application, be sure that joint surfaces are clean, dry and free of all contamination.
* Apply sealant evenly, If necessary, use masking tape and remove the tape while the sealant is still wet.
* Joint dimension should allow for 6 mm minimum and 12 mm maximum thickness for sealant.
* Proper design is 2:1 width to depth ratio.
* If necessary, use back up material to adjust joint depth.
Consumption (approx.)
| Joint width | 12 mm | 20 mm | 24 mm |
|
Joint Depth |
6 mm | 10 mm | 12 mm |
| Joint length / 600 ml | 8 meters | 3 meters | 2 meters |
Surface Preparation
Brush and remove dust before applying on concrete and other alkaline surfaces.
STANDARDS
Meets or exceeds the requirements of the following specifications:
* CE marked for EN 15651 for façade applications
RESTRICTIONS
* Avoid application below +5 °C and above +35 °C.
* Do not apply on curing silicones.
* Minimum depth for working joint is 6 mm.
* Maximum expansion and contraction should not exceed 25% of average joint width.
STORAGE AND SHELF LIFE
* 12 months if stored in its original package, away from direct sunlight and moisture, between +10 ⁰C and +25 ⁰C
