Find by project type
-
SV-888 25kg Barrel Weather Resistance Sillicone Sealant
SV-888 silicone weatherproof sealant is a one part, elastomeric and neutral cure silicone sealant, designed for glass curtain wall, aluminum curtain wall and building exterior design, has excellent weathering properties, it can form durable and most building materials, waterproof and flexible interface.
-
SV 121 Multi-purpose MS Sheet Metal Adhesive
SV 121 is a one-component sealant based on silane-modified polyether resin as the main component, and is an odorless, solvent-free, isocyanate-free, and PVC-free substance. It has good viscosity to many substances, And no primer is needed, which is also suitable for the painted surface. This product has been proved to have excellent ultraviolet resistance, so it can be used not only indoors but also outdoors.
-
SV Fix All MS High Tack Adhesive Sealant
SV Fix ALL High Tack is a high quality, neutral, elastic, 1-component adhesive sealant based on SMX-Polymer with a very high initial tack. Fix ALL High Tack is a KOMO-certified construction adhesive based on BRL3107 -
SV-900 MS Polymer High-elasticity Sealant Adhesive
SV900 is a silicone-modified, low-modulus, high-elasticity, one-component sealant. It cures upon reaction with atmospheric moisture to form a soft, elastic rubber.
The surface drying time and curing time depend on humidity and temperature. The curing time is also influenced by joint depth. Higher temperature and humidity accelerate surface drying and curing, while lower temperature and humidity slow down these processes.
SV900 contains no solvents, isocyanates, silicone, or PVC. It exhibits good adhesion to many substrates and is compatible with paint systems.
This sealant also offers good UV resistance, making it suitable for both indoor and outdoor applications.
-
SV906 MS Nail Free Adhesive in Drum
SV906 is a one-component, neutral, high-performance, elastomeric sealing adhesive based on modified silane polymers with excellent bonding and mechanical properties.
-
SV 315 Polyurethane Bonding Urethane Adhesive Sealant For Wood Floor
SV315 is a one-component, durable and flexible interior polyurethane adhesive for direct elastic bonding of timber floors. The adhesive is of low viscosity and cures on exposure to atmospheric moisture. -
SV-312 One- component Polyurethane Windshield Glass Sealant Adhesive
SV312-A environmentally friendly polyurethane glass bonding sealant is a one-component moisture-curing polyurethane bonding adhesive with low VOC Volatile, good sealing performance and cohesion, no damage to the adhered substrate Corrosion-free, no pollution to the environment, with metal, Good adhesion to various substrates such as glass.
-
SV400 Two-Component Injectable Epoxy Chemical Anchor Adhesive for Concrete
SV400 is a two-component injectable epoxy anchoring adhesive for threaded rods and rebar in cracked and uncracked concrete. It is thixotropic, shrinkage-free, suitable for damp concrete, and cures to 95 N/mm² compressive strength with a service temperature of -40 °C to +50 °C. Supplied in 400 ml and 600 ml cartridges, 20 per carton.
SV400 is formulated for structural post-installed connections: anchoring threaded rods and rebar into walls, slabs, columns and foundations, connecting structural steel, and strengthening concrete members in renovation and retrofit work. The epoxy system is solvent-free, low in emissions, and cures without shrinkage, so the bond develops full contact with the drilled hole wall even in damp concrete. Because it is injectable and thixotropic, it fills the hole from the bottom up without voids and does not run out of overhead or horizontal holes.
-
SV G1-EPS INSULATION BOARD ADHESIVE FOAM
G1-EPS is made of polyurethane environmental protection material, with high bonding strength, large spraying coverage, safety and health, non-toxic and non-irritating smell, fast drying, good spraying performance and other characteristics. Compared with traditional all-purpose adhesive, G1-EPS overcomes product defects such as toxic, odorous, long drying time and damage to human health. This product is widely applicable, convenient and fast. It can be used only by shaking and gently pressing the self-spraying button to solve the problems of scraping, brushing and rolling coating before the change and relying on the air compressor to squeeze out the glue. It can play a significant role in outdoor, aerial work, and the convexity and dead corner bonding of special materials.
-
SV B1 Fireproof Self-expanding Polyurethane Foam
B1-FR special polyurethane foam sealant for fire engineering, self-extinguishing from fire, high safety factor. Mainly used in places with flame retardant requirements, also suitable for fixation, sound insulation, thermal insulation, sealing, moisture-proof, dust-proof, gas isolation, filling structural vacancies, engineering holes and various cracks, etc. (The wooden door shall be installed in strict accordance with the wooden door installation specification. For details, please call our customer service department).
-
SIWAY A1 Flexible Polyurethane Expansion PU Foam
SIWAY A1 PU FOAM is a one-component, economical type and good performance Polyurethane foam. It is fitted with a plastic adapter head for use with a foam application gun or a straw. The foam will expand and cure by moisture in the air. It is used for a wide range of building applications. It is very good for filling and sealing with excellent mounting capacities, high thermal and acoustical insulation. It is environmental friendly as it does not contains any CFC materials
-
SV110 Single Component Polyurethane Waterproof Coating for Outdoor and Indoor
SV110 is one component polyurethane waterproof material with excellent elasticity. Mainly used for outdoor roofing and indoor waterproofing of the basement layer. The surface needs to add a protective layer, such as floor tiles, cement water slurry, etc.